Back to Driver Training

Loading and unloading

Clear the hose without a bleeder valve

Release tank pressure, then use vacuum to clear the hose.

Wear safety glasses and all other company- and site-required PPE. During loading and unloading, remain outside the cab at the valves and monitor the transfer. Do not sit in the truck while fluid is being transferred. Use this pressure-release and hose-clearing sequence when there is no bleeder valve.

Release tank pressure

  1. Open the tank's blowdown valve to release pressure.
  2. Watch the pressure gauge and wait until the tank pressure reaches zero.

Clear the hose

  1. Once tank pressure is zero, reverse the pump.
  2. Allow the pump to build vacuum and draw the remaining fluid out of the hose.

Updated procedure

This sequence replaces the original sheet's instruction to loosen a hose coupling to release air. Follow the updated steps above.

View the original reference sheet Clear the hose without a bleeder valve — original training reference sheet

Select the image to open it at full size.

Download original

Source: Erik Isaacson · Bell Training · Unloading Procedure.jpg